Vacuum lift medium truck with suction cups 600 KG
Vacuum lift medium truck with suction cups 600 KG - 200KG / 3700 mm is backordered and will ship as soon as it is back in stock.
Payment Way
Payment Way
After we Confirm the model, the deposit can be paid by paypal, or by T/T credit card transfer, etc.
Delivery and Shipping
Delivery and Shipping
Our products are sent from Qingdao port by default, before shipment, all machinery will be loaded with wooden crates and metal plates to prevent rust and corrosion, and then take photos and videos to customers to confirm, according to the agreed time to load the ship!
Vacuum lift medium truck with suction cups 600 KG
Vacuum Lifter
Double system control, one vacuum system for working, and one for alternate.American THOMAS vacuum pump
Description
Description
Electric Vacuum Lifter — RMLO60
600kg Electric Vacuum Lifter for Glass, Stone, Panel & Steel
The Risenmega RMLO60 is a battery-powered, walk-behind vacuum lifter rated to 600kg — built on the same compact 840mm footprint as our RMLO50, so you get extra load headroom without a bigger machine to maneuver. No air compressor, no shop power outlet, no waiting on a plug.
Every RMLO60 lift is confirmed against a live digital vacuum readout before the load ever leaves the ground — no guessing, no gauge-watching by feel.
Overview
600kg of capacity, without stepping up in size
The RMLO60 slots into the Risenmega vacuum lifter line as the step-up capacity model for teams who are outgrowing 500kg but don't need the larger 800kg chassis. It shares its 24V/1500W drive motor, 24V/2200W lift motor, and 840×2660mm footprint with the RMLO50 — so operators get the extra rated capacity while the machine still fits through the same doorways, bays, and racking aisles they already work in.
- Battery-driven, walk-behind operation — no air line, generator, or power cable required on the shop floor or job site.
- Q355 manganese-steel frame, Swiss Bucher hydraulics, and an American THOMAS DC vacuum pump with a Panasonic digital vacuum gauge.
- Full range of motion: 360° manual rotation, 90°+90° side turning, 150mm side-shift, and boom reach to 3,700mm.
- Wireless dual-joystick remote with a Panasonic auto start/stop vacuum sensor, so one operator runs the whole cycle from a safe distance.
Because the RMLO60 uses the same wheelbase and turning circle as the RMLO50, upgrading your rated capacity doesn't mean re-planning your floor layout, storage racks, or truck loading — the machine you already know how to maneuver simply carries more.
Why RMLO60
What you're actually paying for at 600kg
600kg Rated, Panasonic-Verified
A digital vacuum gauge confirms hold pressure before every lift, and suction is adjustable from −12kPa to −71kPa so you're never lifting on a guess.
No Bigger Than the RMLO50
840mm width and a 2,660mm length keep the RMLO60 maneuverable in the same aisles, doorways, and load bays as its 500kg sibling.
Self-Contained, Anywhere
A maintenance-free 24V battery pack runs the pump, lift, and drive systems — no compressor, no shop outlet, no extension cords across the floor.
Engineered-In Redundancy
Emergency stop, emergency lowering, a cylinder holding valve, and AC battery protection guard every lift, with an optional dual-vacuum backup circuit.
Where It Fits
RMLO50 vs. RMLO60 vs. RMLO80 — choosing your capacity
Not sure the 600kg model is the right fit? Here's how the RMLO60 sits between its closest siblings in the range.
| Specification | RMLO50 | RMLO60 | RMLO80 |
|---|---|---|---|
| Load Capacity | 500 kg |
YOU'RE VIEWING 600 kg |
800 kg |
| Max Lifting Height | 3,700 mm | 3,700 mm | 4,500 / 5,000 mm |
| Driving Motor | 24V/1500W | 24V/1500W | 24V/1500W |
| Lifting Motor | 24V/2200W | 24V/2200W | 24V/2200W |
| Overall Width | 840 mm | 840 mm | 1,070 mm |
| Overall Length | 2,660 mm | 2,660 mm | 2,800 / 3,000 mm |
| Battery | 2×12V/100Ah | 2×12V/100Ah | 2×12V/150Ah |
| Front Wheel | Ø400×90mm ×2 | Ø400×90mm ×2 | Ø400×90mm ×4 |
Need more reach or a wider frame? The RMLO80 steps up to a 1,070mm-wide chassis with an extra pair of front wheels and up to 5,000mm of lift height. See our full RMLO range or contact us with your heaviest regular load and we'll confirm the right fit.
How It Works
From pickup to placement, verified at every stage
Position & align
Walk the lifter into place and align the suction pad frame over the glass, stone, panel, or steel surface to be lifted.
Inhale & confirm
Press Inhale to build vacuum to at least −54kPa. The Panasonic digital gauge confirms a safe hold before any weight comes off the ground.
Lift, rotate & place
Raise the boom up to 3,700mm, rotate 360°, tilt, and side-shift 150mm from the wireless remote to set the load exactly where it needs to be.
Operating Features
What's powered, and what you control by hand
Powered (Automatic) Functions
- AUTOLateral side shift — 150mm total (75mm left + 75mm right)
- AUTOMain boom lifting and lowering
- AUTOTelescopic boom extend and retract
- AUTOPad frame turns upward toward the ceiling or downward to the ground
Manual Functions
- MANUALPad frame 360° rotation (electric rotation available as an option)
- MANUALPad frame 180° tilt (electric tilt available as an option)
- MANUAL90° side turning, left and right(electric side turning available as an option)
Technical Data
RMLO60 full specifications
Grouped by system so you can find the number you need without scanning a wall of rows.
¹ Electric rotation and electric tilt are available as options. ² Cross-check against your unit's nameplate before publishing — some Risenmega documentation for this frame size lists 120Ah packs; confirm the figure that matches current production. ³ Pad size/quantity is not broken out separately for RMLO60 in the source spec sheet; shown here matching the RMLO50 pad frame since both share the same width, length, and wheel sizing — verify against your factory spec before publishing.
Vacuum Control & Safety
Pressure you can see, safety systems you can rely on
Vacuum Control Panel
- Vacuum system — dedicated on/off control for each circuit
- Vacuum gauge — live kPa readout
- Master power switch — pull to switch on, push to switch off
- Inhale button — builds vacuum before lifting
- Release button — releases pressure once the load is set down
- Independent pad valves — reconfigure the pad layout for irregular loads
- Optional dual vacuum system — live + standby circuit with pressure compensation
-
Emergency Stop Button
Immediately halts all lifter functions.
-
Emergency Lowering System
Brings a suspended load down safely if power is lost.
-
Cylinder Holding Valve
Locks the lift cylinder in place, preventing drift under load.
-
AC Battery Protection
Guards the battery system against overcharge and fault conditions.
-
Optional Dual Vacuum Backup
A standby circuit with pressure compensation keeps holding pressure steady if the primary circuit is interrupted mid-lift.
Applications
Built for heavier daily glass, stone & panel handling
- Glass processing & tempering plantsMove raw and tempered sheet between stations without a second set of hands.
- Curtain wall & architectural glass installationPosition larger panes precisely on site with 360° rotation and 150mm side-shift.
- Stone slab handlingGranite, marble, and engineered stone slabs at the upper end of typical single-sheet weight.
- Metal & composite panel fabricationHandle heavier gauge panels without upgrading to a full-size gantry lift.
- Warehousing, loading docks & raw-sheet transport15% climbing gradient handles moderate ramps and dock inclines.
Vacuumming materials:
Maintenance & Support
Inspection schedule
Follow this frequency schedule and correct any fault before the next lift. If the RMLO60 is used less than one day in a two-week period, perform the Periodic inspection before using it again.
| Action | Every Lift | Frequent (20–40 hrs) | Periodic (250–400 hrs) |
|---|---|---|---|
| Examine vacuum pads for contaminants or damage | ✓ | ✓ | ✓ |
| Examine load surface for contaminants or debris | ✓ | ✓ | ✓ |
| Examine controls and indicators for damage | — | ✓ | ✓ |
| Examine lifter's structure for damage | — | ✓ | ✓ |
| Examine vacuum system for damage | — | ✓ | ✓ |
| Examine air filters for conditions requiring service | — | ✓ | ✓ |
| Perform a vacuum hold test | — | ✓ | ✓ |
| Check for unusual vibration or noise while operating | — | ✓ | ✓ |
| Test the wireless remote control system | — | ✓ | ✓ |
| Full electrical & structural inspection per local code | — | — | ✓ |
Replace vacuum pads every 2 years, or sooner if sealing edges are cut, cracked, or glazed. Never clean vacuum pads with harsh chemicals or rubber conditioners — both accelerate wear on the sealing edge.
FAQ
Common questions about the RMLO60 vacuum lifter
What is the load capacity of the RMLO60?
The RMLO60 is rated to lift 600kg (1,323 lb) of glass, stone, panel, or steel, with a max lift height of 3,700mm and 360° rotation.
How is the RMLO60 different from the RMLO50 and RMLO80?
The RMLO60 shares its 840×2,660mm footprint and motor specs with the RMLO50 but is rated to 600kg instead of 500kg. The RMLO80 is a larger machine — a 1,070mm-wide frame with capacity up to 800kg and lift height up to 5,000mm.
Does the RMLO60 need an air compressor or external power?
No. A maintenance-free 2×12V battery pack powers the vacuum pump, lift motor, and drive system, so it doesn't need a shop air line, generator, or power cable.
What vacuum pressure does it need to operate safely?
A minimum of −54kPa is required before lifting. Suction is adjustable from −12kPa to −71kPa via the remote, and a Panasonic digital gauge shows live pressure so you can confirm a safe hold before every lift.
What materials can the RMLO60 handle?
Any smooth, non-porous, rigid surface — most commonly glass, stone (granite, marble, engineered stone), architectural panels, and steel sheet, provided the suction pads can form a proper seal.
Can it operate on ramps or inclined surfaces?
Yes. The RMLO60 is rated for a climbing gradient of up to 15%, making it suitable for loading docks, ramps, and moderately uneven floors.
What safety systems are built in?
Every RMLO60 ships with an emergency stop button, an emergency lowering system, a cylinder holding valve, and AC battery protection. An optional dual vacuum system adds a live backup circuit with pressure compensation.
Which RMLO model is right for my job?
Match the model to your heaviest regular load with some margin: RMLO50 for loads up to 500kg, RMLO60 up to 600kg, RMLO80 up to 800kg. Contact us with your material, sheet size, and site conditions and we'll recommend a configuration.
Ready to move your next 600kg load?
Tell us your material, sheet size, and site conditions — we'll confirm whether the RMLO60 is the right fit or point you to the model that is.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
